Featuring great resistance to corrosion and incredible mechanical properties, Nickel 200 is quite a prominent solid solution strengthened, commercially pure wrought material.  This 99.6% pure wrought nickel alloy provides a number of benefits that are enjoyed by its primary component (Ni). Nickel is one of the strongest metals available and tends to impart a lot of advantageous characteristics to this alloy. This pure nickel alloy has incredible resistance to even the most caustic and corrosive environments, acids, alkalis, and media.  Nickel 200 additionally has high electrical and thermal conductivities, while having low gas content and vapor pressure.

Features of Nickel 200

  • Enjoys distinctive magnetostrictive and magnetic properties
  • High electrical and thermal conductivities
  • Low gas content
  • Low vapor pressure
  • Highly resistant to diverse reducing chemicals
  • Incredible resistance to caustic alkalies
  • High electrical conductivity
  • Remarkable corrosion resistance to both natural and distilled water
  • Resistance to both neutral and alkaline salt solutions
  • High resistance to dry fluorine
  • Extensively used for the purpose of handling caustic soda

Provides adequate resistance to sulfuric and hydrochloric acids at modest  concentrations and temperatures

Inconel 600 Seamless pipe Mechanical Properties:

Alloy and statetensile strength

Rm N/mm2

Yield Strength

RPO.2N/mm2

Extensibility

A5%

Brinell hardness

HB

annealing treatment55024030=195
solid solution treatment50018035=185

Nickel 200 ASTM Specifications

Pipe SmlsPipe WeldedTube SmlsTube WeldedSheet/PlateBarFitting
B161B622B161B622B162B160B163

Mechanical Properties
Room Temperature properties of Various Products

Product FormConditionTensile (ksi).2% Yield (ksi)Elongation (%)Hardness (HRB)
Rod & BarHot Finished60-8515-4555-3545-80
Rod & BarCold Drawn/Annealed or Hot-Finished/Annealed55-7515-3055-4045-70
PlateHot-Rolled/Annealed55-8015-4060-4045-75
SheetAnnealed55-7515-3055-4070 max
Tube & PipeSeamless Annealed55-7512-3060-4070 max

Nickel 200 Melting Point

PropertiesMetricImperial
Melting point1435-1446°C2615-2635°F
Density8.89 g/cm30.321 lb/in3

Corrosion Resistance

Nickel 200 is significantly resistant to a number of corrosive media.  While it is most useful in reducing environments, this nickel alloy can also be used under oxidizing conditions that result in the development of a passive oxide film. The exceptional resistance of this material caustic is essentially based on this type of protection. However, it is preferable to use Nickel 201 when temperatures above 315°C /600°F are involved, no matter the environment.

Machining

Nickel 200 can be machined adequately at commercial rates if certain viable practices are been followed. This nickel alloy has a tendency to flow under the pressure of the tool cutting edge, subsequently forming long stringy chips.  In some instances, people may use 40° to 45° rake angles for the machining process of this allow in order to avoid a built-up edge. Using high-speed cast-alloy or steel tools would be a good option for machining Nickel 200. In harder tempers, the chip action tends to be significantly better with this alloy, so that cold-drawn rod in the as-drawn or stress-relieved temper would provide an improvement over annealed material.

Hot and cold forming

  • Hot Forming: Nickel 200 can be hot formed easily to just about any shape. Using the ideal temperature during the process of deformation is the most crucial factor in achieving hot malleability. 650° to 1230°C/ 1200° to 2250°F is considered to be the ideal temperature range for hot forming this material.  More than the temperature of 870°C/1600°F should be used for all hot forging work as Nickel 200 may stiffen below this temperature. However, choosing to conduct light forging below the temperature of 650°C/1200°F would result in superior mechanical. 870° to 1230°C/1600° to 2250°F additionally would be the best temperature range for hot bending this material.  It is important to make sure to avoid heating this nickel alloy above the upper-temperature limit of 1230°C/2250°F, no matter the operation.
  • Cold Forming: Almost all conventional cold forming methods can be used for working on Nickel 200.  In most cases, this alloy would behave in a similar fashion as mild steel, excepting for the fact that due to the higher elastic limit of this material superior power would be necessary to perform the relevant operations. Hence, when it comes to manual operations like hand hammering and spinning, only limited shapes can be worked on it.  The assistance of frequent anneals to restore softness would be needed to conduct severe work manually.

 The major applications of Nickel 200

  • Handling of foods
  • Aerospace and missile components
  • Drums to transport chemicals
  • Synthetic fibers
  • Food processing equipment
  • Rocket motors
  • Piping and equipment used in conjunction with alkalis
  • Electrical components
  • Wires for heating elements
  • Battery connections/terminals

A lot of nickel pipes and pipe fittings are made with Nickel 200 for various environments that demand high corrosion resistance.

Nickel 200 material equivalent

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
Nickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2

We offer high quality, lower cost but the best service. As a result to that our export account today is in over 45 countries some of them are United States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait, Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa,, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New Zealand We welcome your inquiries.

Scroll to Top