Monel K500 Buttweld Fittings
- Home
- Buttweld Fitting
- Monel K500 Buttweld Fittings
Midland Alloys is a trusted Monel K500 Buttweld Fittings Supplier in India, known for high-quality products and dependable service. Our Monel K500 butt weld fittings are made from a nickel-copper alloy with added aluminum and titanium, which boosts strength and hardness. These fittings handle high pressure, stress, and corrosion, making them ideal for various industrial uses. We offer various types like elbows, tees, reducers, and crosses in different sizes and schedules. The Monel K500 Buttweld Fittings Price per Kg depends on size, type, and custom requirements. We always offer competitive rates without compromising on quality.
Benefits of Monel K500 Pipe Fittings UNS N05500
Monel K500 Buttweld Fittings offer several alloy-specific advantages that make them ideal for tough industrial conditions. These fittings combine the unique strength of nickel-copper alloy with added durability, corrosion resistance, and stability.
- High Strength and Durability – Made to handle high pressure and mechanical stress without cracking.
- Corrosion Resistance – Outstanding defense against acidic, chemical, and salty environments.
- Good Weldability – The strength of ASTM B366 K500 Buttweld Pipe Fittings is maintained even after welding.
- Dimensional Stability – Maintains shape and size even under temperature changes or long-term use.
- High Fatigue Strength – Performs well under repeated load and stress, extending service life.
Specification of Nickel Alloy Buttweld Fittings
This section covers the standard specifications of Monel k500 butt weld pipe fittings, including dimensions, sizes, and manufacturing standards. It helps in selecting the right fittings for system design and project requirements.
Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48"
ASTM B366 / ASME SB366
DN15-DN1200
90 Deg. Elbow, 45 Degree Elbow, LR/SR Elbow, Reducers, Tee, Cross, Bends, U bend, 180 Deg Bend, End Cap, Lap-joint Stub End
SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Beveled Ends, Plain Ends
ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Pickled Finish,Sand/Shot Blasted Finish, Polished Finish
Types of Monel K500 Buttweld Fitting
Monel fittings are available in various shapes and ends to meet specific flow, directional and sealing needs. Each type supports proper alignment and dimension standards in pipeline systems.
-
Elbow (90°, 45°, Long Radius, Short Radius)Modifies the pipeline's flow direction at predetermined angles with regulated radii.
-
Tee (Equal Tee, Reducing Tee)Adjusts the size of the main and branch lines to split or combine flow at 90° intersections.
-
A reducer (eccentric or concentric)joins pipes with varying diameters while preserving flow offset or alignment.
-
stub endIn non-permanent piping configurations, the stub end (long or short) connects to lap joint flanges for disassembly.
-
Return Bends (180° bend)Redirects flow by 180 degrees, allowing the pipeline to reverse direction.
-
Cross (Equal Cross, Reducing Cross)Provides multidirectional flow by joining four pipes at right angles.
-
pipe capTo stop flow or pressure, an end cap also known as a pipe cap, seals the pipe's open end.
-
Bend (3D, 5D, Custom Radius)This tool uses predefined or custom radii to gradually change the direction of pipelines.
-
nipplesShort pipe segments called "nipples" (also known as "barrel" or "swage") are used to join two fittings or pipes.
-
Collar / CouplingLinks two pipe sections in a straight run with a secure and leak-free joint.
Technical Details & Delivery Condition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel K500 | 2.4375 | N05500 | – | – | – | – | – |
Monel Alloy Buttweld Fittings Grades We Offer
Monel Alloy Pipe Fittings Price List
| Price List of Monel 400 Pipe Fittings</strong > | Monel Alloy K500 Pipe Fittings Price in India (INR)</strong > | Alloy 400 Pipe Fittings Price in USD</strong > | Monel K500 Pipe Fittings Price in UAE (Dirham)</strong > |
| 400 Monel Elbow Price List | ₹ 820 | $ 7.39 USD | 32.58 AED |
| Monel® Alloy K-500 Pipe Fittings Cost | ₹ 1500 | $ 17.82 USD | 52.11 AED |
| Monel 400 Elbow Price | ₹ 2200 | $ 63.17 USD | 350.30 AED |
| Monel® K500 Weld Fittings Prices | ₹ 1400 | $ 24.78 USD | 72.30 AED |
| Monel 400 Reducing Elbow Price | ₹ 590 | $ 4.82 USD | 34.20 AED |
| Monel K-500 Long Radius 90 Degree Elbow Price | ₹ 1340 | $ 14.06 USD | 72.96 AED |
| Price of Schedule 10 Monel 400 Pipe Fittings | ₹ 740 | $ 35.35 USD | 75.73 AED |
| Price of Monel K500 Reducer | ₹ 1520 | $ 18.00 USD | 63.53 AED |
| Monel Alloy 400 Seamless Fittings Price List | ₹ 2300 | $ 35.22 USD | 250.40 AED |
Monel Alloy Buttweld Pipe Fittings Manufacturing Standards
| ASME B16.9 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Manufacturing Process of Monel K500 Buttweld Fitting
The manufacturing process of Monel k500 buttweld fittings begins with the selection of the raw material for Monel 400 alloy. The alloy is cut into required sizes and then shaped through hot or cold forming, depending on the design. In many cases, solution annealing is carried out to restore corrosion resistance and uniform structure. The fittings are surface finished to provide smooth edges and correct measurements. Before being tested with mechanical and non-destructive testing, each piece is thoroughly inspected for defects. Final products are supplied in compliance with international standards.
Pipe
Cutting
Forming
Sizing
Heat Treatment
Pickling
Beveling
Polishing
Sand Blasting
Elbow
Inspection
Analytic
Marking
Packing & Shipping
Applications of K500 Monel alloy buttweld fittings
K500 Monel alloy buttweld fittings are essential components of systems that require durability, strength, and resistance to pressure. It links pipes in the oil and gas industry that handle corrosive fluids, high-pressure steam, and sour gas. Chemical plants use it in reactors and processing lines where acid and alkali flow continuously. In power generation, Monel K500 seamless buttweld fittings manage high-temperature steam and cooling systems. In marine and shipbuilding, it is used in ballast systems, seawater cooling, and deck piping. Aerospace and defense applications include jet fuel systems, hydraulic lines, and engine sections where failure is not an option. Their toughness ensures that operations run safely and smoothly.
Midland Alloys Inc., headquartered in India, has established itself as a leading exporter of Monel k500 products to international markets. We maintain a continuous supply throughout the Gulf area, including the UAE, Saudi Arabia, Oman, Qatar and Kuwait, where demand is driven by oil and gas projects and big construction projects. Our reach is expanding in Europe, with regular exports to Germany, the UK, France, and Italy, and across the Asia-Pacific region, covering Singapore, Malaysia, Indonesia, and South Korea. We also cater to growing markets in Africa, such as South Africa, Egypt, and Nigeria, along with Latin America, where Brazil remains a key destination. To ensure timely delivery, each shipment is processed with detailed customs paperwork, export-quality packing, and careful port management. Over the years, we have built strong working relationships with project contractors, OEMs, distributors, and government agencies across the world.
Monel K500 Buttweld Fittings VS Monel 400 Buttweld Fittings
Monel K500 buttweld fittings and Monel 400 buttweld fittings both provide superior corrosion resistance; however, they vary in strength and composition. Monel 400 is made of about 63% nickel, and up to 34% copper, making it easier to fabricate and ideal for general use. On the other hand, Monel K500 includes added aluminum and titanium, which improve hardness and strength through precipitation hardening. This makes Monel K500 buttweld fittings better suited for high-stress or high-pressure environments. While both grades resist corrosion well, K500 Monel offers added protection against stress corrosion cracking. However, the increased strength in K500 can make machining and forming a bit tougher compared to Monel 400.
Why choose Midland Alloy for Monel K500 Buttweld Fittings
Choose Midland Alloys Inc. for Monel K500 buttweld fittings when quality, service, and reliability matter most. As an ISO 9001 certified manufacturer, we deliver top-grade fittings built to perform in the toughest conditions. Our fittings go through to stringent testing, which includes PMI, mechanical, hardness, IGC, and ultrasonic testing. It ensure strength, durability, and accuracy. We offer custom sizes, finishes, and coil forms to match your exact needs. With a strong global export network, we ensure fast and on-time delivery every time. Additionally, provide 24/7 client service, comprehensive material traceability and professional guidance from order placement to installation.
FAQs –Monel K500 Alloy Buttweld Fittings
Yes, Monel K500 fittings retain their strength, and toughness even at cryogenic temperatures, making them ideal for extremely cold environments.
Yes, Midland Alloys provides third-party inspection from recognized authorities upon request, guaranteeing adherence to international standards.
Although fitting type and wall thickness affect pressure ratings, they meet ANSI/ASME standards like B16.9, and are capable of handling high pressure situation.
Yes, Monel K500 offers higher strength and hardness than Monel 400 due to age-hardening elements like aluminum and titanium
Yes, they can be welded using conventional welding techniques, although they require careful handling to maintain mechanical properties.
